20190107_075
============
1. The use of the "No Reception" dialogue box will only be used on first
screen showing after a new software download and when a corruption error in
the Service List is detected.
In either case, the end user must perform an Autostore to get a working
system.
In the latter case, it should be declared to in2digi, particularly if it is
a regular occurrence.
In general, no reception is now shown by using the Antenna ICON with
strikethrough.
2. If DABTuner Reset from power up occurs more than twice then clear memory
and issue a DAB factory reset.
"No Reception" dialogue box will be displayed and the user needs to do
Autostore.
3. DAB DLS for short display will not display, if within 20 characters, '-'
or ':' symbols.
4. If a different SW version (>075) is being installed, then erase memory
and reset DAB.
This results in a high confidence single process update to replace the
current two stage process employed.
User will need to perform Autostore
5. A polling process is introduced for the Service List
6. Set address for MB to 0x100(Dynamic node addressing). This enables
module recovery if inadvertently programmed with JLR SW.
7. Fix diagnosis antenna logic that includes the potential usage of a
passive antenna.


20180427_074
============
1.	Change station status to “tuned” on power up. For low line ntg4.5

20180323_073
============
1. Shutdown commences about 10seconds after the optical light is tuned off
2. Last station is stored 15 seconds after tuning to station
3. If the light is off but system is not shutting down for some unknown
reason, then the hard shutdown will commence after 1.5 mins 

20180318_072
============
1. On shutdown, remove write/update list
2. Last station is now stored 30 seconds after tuning to station

20180309_071
============
1. Service Link Info fix - for station with differing service id
2. Store last station based on actual current ensemble - eg Gold London ->
Gold Berkshire.
3. Add timeout on service linking - 15sec in case of lock up

20180119_070
============
1. Delay service following. Only do service following once station is tuned.
ie there is reception.

20171004_069
============
1. Added mute at MSC ERR < 40
2. Fix autostore bugs when no antenna attached
3. Fix attempt to look for service linking when antenna is not fitted